What Travelers Should Know About Driving Through Mountain Passes
ByBrandon B.6 min read

Every winter, drivers who handled the flat highway just fine end up gripping the wheel on a narrow grade and wondering whether their tires will hold. That worry is reasonable. Snowy, slushy and icy pavement plays a part in over 1,300 deaths and more than 116,800 injuries in U.S. crashes each year, and mountain passes combine those conditions with steep drops and sharp curves.
A little planning and some steady habits will head off most trouble on a mountain pass. Below you will find pre-trip checks, technique for climbing and descending, the basics of winter rules, and steps to take if the weather changes mid-drive.
Plan Your Mountain Pass Route Before You Leave
The most useful lesson is that timing and current conditions prevent more problems than driving skill does. Crews doing avalanche control may close canyon roads outside Salt Lake City with little notice, including days when the city below stays clear. The same pattern holds on passes across the West.
A vehicle in good shape is the other half of the plan. Many people replacing an older car before canyon season compare the trucks and SUVs on a toyota dealership utah inventory page, paying close attention to ground clearance and tire options. The basic checks below count for more than the brand of vehicle you happen to own.
Check Conditions, Closures and Timing
Start with your state's 511 road site, then add a National Weather Service forecast and live webcams. Check again at the last town before the climb, because the summit can look very different from the valley.
Set go/no-go triggers before you start: if a storm warning, chain rule or closure is posted, wait it out. Leave early to avoid afternoon storms and fatigue, and skip unfamiliar passes at night, when many stretches have no lights and few guardrails.
Get Your Vehicle Ready
Brakes: no grinding, soft pedal or pulling to one side.
Tires: good tread depth and pressure checked in cold air.
Fluids: coolant, oil and a winter-blend wiper fluid topped off.
Lights: confirm that the headlights, brake lights and turn signals each work.
Fuel: a full tank before the last town, since stations are sparse.
Mountain Driving Tips for Climbs, Curves and Descents
Handling Steep Grades and Hairpin Turns
A calm, steady pace keeps you in control on any grade:
Finish braking ahead of each bend so you are not slowing while already turning.
Stay fully in your lane, especially on blind corners.
Keep a larger gap than you would on flat ground.
Use pullouts to rest or let faster traffic pass.
Letting the engine hold your speed on a downgrade works best when you select a lower gear or switch to manual mode. If the gauge climbs toward hot during the ascent, switch off the air conditioning to ease the load on the engine.
Heavy Vehicle Advice for Mountain Grades
Heavier rigs need extra care, and the same advice applies to RVs and anyone towing a trailer. Know your loaded weight, stay within the tow rating, and choose a low gear before you crest the top.
Runaway truck ramps exist for brake failure, so use one without hesitation if your brakes give out.
Winter Mountain Driving: Tires, Chains and Traction
Which Tires and Chains You Really Need
The table below lays out the usual choices, since tire labels often puzzle people new to winter travel.
Option | Best For | Main Limitation | Typical Rule or Note for Passes |
|---|---|---|---|
All-season | Dry or wet pass days | Weak grip on snow and ice | Often not enough when traction rules apply |
M+S (mud and snow) | Light snow | Grip fades on ice and deep snow | Often accepted with enough tread |
Mountain/snowflake rated | Regular winter trips | Still limited on glare ice | Meets most winter tire rules |
Studded | Icy roads | Noisy and wears dry pavement | Allowed only in set months |
Chains | Severe storms and steep grades | Low speeds required | Mandatory when chain laws are posted |
Rehearse putting chains on at home on a dry day and keep the right size in the trunk, because they only work once mounted.
Why AWD and 4WD Do Not Fix Ice
All-wheel and four-wheel drive send power to more wheels, which helps you start and climb. Braking and steering depend on tire grip alone, so these systems give no help there, however many wheels are driven.
Pick a pace that leaves room to stop instead of the top speed your car allows, and keep your inputs smooth with a longer gap ahead. Bridges and shaded bends are where a thin, clear glaze usually appears earliest, so take extra care there.
How Rules Differ in Colorado, Utah and Beyond
Pass rules vary by place and season, so check the local transportation agency before each trip.
Colorado: every year between Sept. 1 and May 31, Colorado's Traction Law applies along the I-70 Mountain Corridor and now carries updated tire and traction standards.
Utah: avalanche control frequently shuts canyon roads, and traction requirements may be in force during winter months.
What to Do If Weather Turns or You Get Stuck
Emergency Kit to Carry
Because rescue may take hours in remote terrain, load a simple kit even for brief drives:
A blanket, extra layers and a pair of gloves
Water and snacks
Flashlight and a phone power bank
Traction mats or sand, a shovel and an ice scraper
Staying Safe During a Closure or Breakdown
If conditions get worse, pull into a turnout or exit and wait for plows instead of pushing on. If you end up stranded, remain in the car and call for help, and dig snow away from the tailpipe so carbon monoxide cannot collect.
Questions People Also Ask About Mountain Pass Driving
Which Vehicle Features Matter Most for Steep, Winding Roads?
Brakes, tread depth and engine torque come first. Powering all four wheels improves grip on slick surfaces and a low center of gravity steadies the car in curves, but worn tires or weak brakes cancel out both benefits. Keeping up with brake fluid, coolant and tire pressure often counts for more than the vehicle's size or price.
What Makes Brakes Fade on Long Descents, and What Stops the Problem?
Brakes turn motion into heat, and steady pressure on a long descent can overheat the pads and fluid, which cuts stopping power. Let a lower gear control your pace down the grade, then apply firm, brief pressure on the pedal whenever you need extra slowing. Light, constant braking over many miles is the leading reason pads and fluid fade.
What Happens to Engines and Drivers at High Altitude?
Thinner air holds less oxygen for combustion, so naturally aspirated engines can lose roughly 3 percent of power per 1,000 feet, while engines with forced induction lose less. Drivers may feel tired, get headaches or lose focus, so plan rest stops, drink plenty of water and allow extra time for passing and climbing.
The Bottom Line
Mountain passes reward drivers who plan more than drivers who push. Before your next trip, set a firm go/no-go rule, check the road and weather twice, and give yourself a buffer day so a storm becomes a delay instead of a danger. Inspect the brakes, tires and fluids, and get the emergency kit packed well ahead of time.
Once you are on the road, slow before curves, use a low gear on the way down, and drive at a speed you can stop from. If conditions turn, pulling over to wait is almost always the safest choice, and these small habits turn a tense climb into a calm, scenic drive.